Menu
Cart

Instructions

Thank you for your recent GOLFJAMS purchase.Our customers are our top priority, and we strive for 100% satisfaction. Please take the time to read this manual carefully before using your GOLFJAMS device. If you have any questions or concerns about your order, please don't hesitate to contact us at www.golfjams.com. Enjoy The Official Sound of Golf.

APPENDIX INTRODUCTION

OTHER APPLICATIONS:


Box Contents

GOLFJAMS has supplied you with two extra pieces of 2"x7" loop(soft) self adhesive velcro.This is for adhering a phone, music device, GPS unit, etc, to the other side of the cart cllp opposite the speaker.It makes things much easier when all your devices are out of the cart and more accessible. The cup holders arc better left for other things. Follow these steps to attach other devices.

1.Measure the back of your device or device holder
2.Take one of the 2"x7" loop(soft) pieces of velcro and cut It down to the length measuring top to bottom.

• Speaker With Loop Velcro Bottom
• USB Charging cable
• 3.Smm Audio cable
• USB Battery charger
• 2 CART CLIPS 1.0"AND 1.25"
• 2 PC Z"x7" Loop Velcro For Other Applications (Phone, Music Devise, GPS Unit, Etc.)
• 2 Poker Chip Ball Markers
• Protective Carry Bag

• Firmly attach the bottom of the speaker to either side of the clip, make sure that the speaker is connected to the clip evenly and securely.
Note: The loop(soft) velcro on the bottom of the speaker should align evenly with the hook(rough)Velcro on the clip. (Both pieces are the same size…2”x7”).

• Power on the speaker, pair it to your device, and enjoy.

GETTING STARTED GETTING STARTED

AUX in port @
• Here you can connectyour speaker to external media devices.
Micro USBJack@
•This port cannot be used for external device connection, for charging use only.
M(ode) Button @
•Usethisbutton totoggle between Bluetooth/AUX modes.
•When using wired connection for multiple speakers, press and hold this button to synchronize sound.
Note: When playing music from a Bluetooth device, the Bluetooth mode is always given priority.
Prev/Next(l)
•Use this button to navigate between tracks when Bluetooth device is connected.

1.Please charge your new device for a minimum of two hours before first use.
• Note: a red indicator light will appear when the device is charging, and will disappear when the device is fully charged.
• To prevent damage and risk of electrical shock. do not expose this device to dust, vibration, rain, water or llqulds ofany kind.
• Do not place device in close proximity to open flames or extreme heat
sources.
• Always place your device on level, flat and stable surfaces.
• Avoid placing items on top of your device.
• Do not use excessive force when pressing buttons or handling your device.
• To clean your device, use only a dry, soft cloth or minimally damp cloth
without any corrosive solvent or cleaning agent.

GETTING STARTED I GETTING STARTED

Specifications
• Operation Voltage: 3.7 V
• Charging Voltage: SV
• Output Power: SWatts • 2
• Speaker Spec.: SOmm 2 Ohms SW
• Frequency Response: 60Hz -20Khz
• Lithium Battery Capacity: 4400mA
• THD < 0.5%
• SNR > 90dB
• Dimensions: 1 90mm "' 60mm •70mm
• NFC: NFC area is located on the top of the device next to the MIC port and the power indicator.


Play/Pause @

•While in Bluetooth mode, press and hold to initiate Bluetooth pairing, then continue to use normally for playing and pausing.
V·/V+@
• Adjusts volume. While in Bluetooth mode, a beeping sound will alert you when you have reached maximum volume.

Phone Button ®
• When connected via Bluetooth, press and hold to activate "Siri•or
Android Voice. Press twice to redial.
• Incoming Call: press once to answer, press and hold to reject/end call.

GETTING STARTED I GETTING STARTED

NFC Area @
• Hold your device over this area to use NFC for Bluetooth connection.
MIC @
• For best results, keep within 3 feet of the mic while speaking. Infrared Thermal Sensor @
• Putyour hand near to this area, automatically activate button lights in the dark.
Charging
• To charge your device, firmly connect the supplied adapter to the USB port on the side of the device.
•Charging begins automatically regardless of whether the device is powered on/off.
• The indicator light will show red while charging and will go dark once the charge is complete.


Features

• Advanced CSR Brand Bluetooth Version 4.0.
• Increased Bluetooth transmission rate and higher audio fidelity with decreased power consumption.
• Supports: NFC, Siri and Android Voice Calls.
•Battery status shows on iPhone/ iPod / iPad.
• Double 5W loudspeakers produce high quality stereo sound.
• Use with two or more of these same devices for increased effect.
• Advanced Lithium Battery allows for 15+ hours of playing time!
• Infrared thermal sensors automatically activate button lights in the dark.


GETTING STARTED GETTING STARTED

AUX Bluetooth
•To connect your speaker to a Bluetooth enabled device, hold your

phone or other device within 3 feet of your speaker, press and hold the

Play/Pause button for 3 seconds, and the system will then enter pairing
mode and you should see the indicator light flashing blue and red.

•Pairing mode will automatically be canceled (signalled by abeep) after 3 minutes. To re-enter pairing mode, simply begin again at step # 1.

• Make sure that Bluetooth is enabled on the deviceyou wish to pair with the speaker.
• When scanning for available devices, the speaker should appear as

"GOLFJAMS" on the list of found devices.


GETTING STARTED

When selecting "GOLFJAMS"from the list, you maybe prompted to
enter aPIN code (sometimes called a " ","PIN Number" or• Password") ,the code for this device is: 0000.The speaker will record
this device as the last device paired.

• Pass Key
device (some devices may do this automatically, signaled by "Connected").


GOLFJAMS
• 
Incoming calls will override musicand othermedia with an "incoming call"voice alert, simply press the Phone button toanswer or press and hold to reject/end the call. Press the Phone button to answer a second incoming call.
Press and hold the Phone button for three seconds to activate the Voice function of your phone.


NFC
•Begin by turning on the NFC function of the device you wish to connect to your speaker.
When in Bluetooth mode you can switch to "AUX" by pressing the M button when your Bluetooth device Is paused. While In AUX mode, the green circular light behind the power button will remain on. However, as long as the Bluetooth connection is not terminated, it will remain the prime connection and will override the "AUX" connection when It is played and then if paused again, the AUX connection will reestablish after a three second delay.

Touch the device to the NFC area of your speaker (located on the top of the speaker next to the MIC port and power indicator), and the speaker should connect automatically.


• Advanced CSR Brand Bluetooth Version 4.0.
• Increased Bluetooth transmission rate and higher audio fidelity with decreased power consumption.
• Supports: NFC, Siri and Android Voice Calls.
• Battery status shows on iPhone/ iPod / iPad.
• Double 5W loudspeakers produce high quality stereo sound.
• Use with two or more of these same devices for increased effect.
• Advanced Lithium Battery allows for 15+ hours of playing time!
• Infrared thermal sensors automatically activate button lights in the dark.